Transportation; Long Term Storage - Ingersoll Rand BX-60WH Manual De Utilización Y Mantenimiento

Stopping (Honda Engine)
1. Shift the THROTTLE LEVER [Figure 5] to "LOW" speed
position.
2. Allow the engine to run at low speed for 2-3 minutes before
stopping.
3. Turn the STOP SWITCH ( , [Figure 6]) counterclockwise
to the position "O" (OFF).
Figure 6
4. Close the fuel cock ( , [Figure 7]).
Figure 7
CAUTION
Do not stop engine suddenly while running at high speed.

TRANSPORTATION

1. Fold the handle for convenient transportation and storage.
2. Integrated in the machine frame, the lifting hook is
positioned in the machine center of gravity for convenient
loading onto a transporter.
3. Don't lift on any other point as it may result into machine
damage and serious hazards.

LONG TERM STORAGE

Discharge fuel (No Smoking !)
1. Remove the strainer cup of the fuel cock, place the strainer
over a container and open the fuel cock to discharge fuel
from the fuel tank. Remove the carburetor float chamber bolt
from the bottom and discharge fuel from the carburetor.
2. Close the fuel cock.
3. Change the engine oil with fresh oil.
4. Remove the spark plug, pour about 5 ml of the engine oil
into the cylinder, slowly pull the starter handle of the recoil
starter 2 or 3 times, and re-install the spark plug.
5. Slowly pull the recoil starter handle until resistance is felt
and leave it in that position.
6. Clean the unit and engine.
7. Store the unit and engine indoors in a well-ventilated, low
humidity area. Use the cover to avoid dirt, etc. if storage will
be for a long time.
Always stop the engine and allow to cool down before
covering the unit.
BX-60WH / BX-80WH / BX-120WH Plate Compactors
8-EN
CAUTION
CAUTION
Operation & Maintenance Manual