Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE
(continued)
Cleaning
the Drain Pump Filler
Your Washer is equipped
with a filter that helps prevent excess
lint and foreign
objects like buttons, keys, and coins from
causing damage
to the pump. If the washer fails to drain
properly, unplug the washer and allow the water to cool, if
necessary, before proceeding.
O
Open the drain pump filter access panel.
J
Remove the
from the drain
and allow the
plug
hose,
water to drain completely.
NOTE: If there is a large amount of water in the drum,
you may have to empty your container
several times.
Drain Hose
J
O
UncNp the drain hose and putt it out. Place the end
of the drain hose into a shallow pan or a floor
drain. Make sure not to putt the hose out too far, or
it may not drain properly.
OTwist
pump
to remove.
the
filter counterclockwise
Remove any lint and foreign
objects from the pump
filter. Insert pump filter back into opening and twist
clockwise
to secure. Be sure to close the drain pump
filter access panel.
26
Publicidad
Tabla de contenido
