Product Description And Specifications - Bosch 0 607 153 5 Serie Manual Original

OBJ_BUCH-1540-004.book Page 20 Monday, September 19, 2016 2:47 PM
20 | English
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the fold-out
page with the illustration of the pneumatic tool and leave it
open.
Intended Use
The pneumatic tool is intended for drilling in wood, metal, ce-
ramics and plastic.
Product Features
The numbering of the product features refers to the illustra-
tions on the graphics page. The illustrations are partly sche-
matic and may differ from your pneumatic tool.
1 Drill spindle
2 Clamping area (collar)(e. g. for an auxiliary handle)
3 On/Off switch (lever)
4 Utility clip
5 Hose fitting
6 Spanner flats on the drill spindle
7 On/Off switch
8 Air outlet with silencer
9 Auxiliary handle*
10 Fastening slots for utility clip
11 Hose clamp
12 Exhaust-air hose
13 Fastening screw for attachment cover
14 Attachment cover
15 Air outlet with hexagon nut
16 Sealing ring
17 Exhaust-air set (decentralised)
18 Connection socket on exhaust-air set
19 Silencer on exhaust-air set
20 Connection socket at air intake
21 Supply-air hose
22 Exhaust-air hose, central
23 Key type drill chuck
24 Keyless chuck
25 Chuck key
26 Tool holder
27 Rear sleeve
28 Front sleeve
29 Rotational direction switch
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
1 609 92A 37G | (19.9.16)
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under "Technical data" complies with all applicable
provisions of the directive 2006/42/EC including its amend-
ments and is in conformity with the following standards:
EN ISO 11148-3.
Technical file (2006/42/EC) at:
Robert Bosch Power Tools GmbH, PT/ETM9,
70538 Stuttgart, GERMANY
Henk Becker Helmut Heinzelmann
Executive Vice President Head of Product Certification
Engineering PT/ETM9
Robert Bosch Power Tools GmbH
70538 Stuttgart, GERMANY
Stuttgart, 01.01.2017
Technical Data
0 607 153 5../0 607 154 101
These pneumatic tools belong to the CLEAN product line.
Through its oil-free operation and reduced air and energy con-
sumption, Bosch's CLEAN technology is operator-ergonomic
and helps save the environment.
Operation with air containing oil is also possible.
consumption optimized – C
lubrication-free – L
ergonomic – E
air tool – A
noise reduction – N
Bosch Power Tools