Joie roomie glide Manual De Instrucciones página 8

WARNING
!
Adult assembly required.
!
WARNING! Do not use this product without reading the instructions for
use first.
!
Discontinue using product when child reaches 9kg (approximately 0-6
months) or is able to climb out.
!
WARNING! Stop using the product as soon as the child can sit or kneel
or pull itself up.
!
Do not place additional items (e.g. toys, pillows ...) in the product.
!
Do not use the product if any part is broken, torn or missing.
!
DO NOT USE the product in "Crib Configuration" and/or "Bedside
sleeper Configuration" if any part is missing, damaged or broken. Con-
tact joie for spare parts and user instructions if needed. DO NOT substi-
tute parts.
!
Consult the user manual for the list of components. Examine the product
regularly to make sure that there are no loose, damaged or missing parts.
!
Always use all parts needed for each configuration of use.
!
Be Aware of the risk of open fire and other sources of strong heat, such
as electric bar fires, gas fires, etc. in the near vicinity of the cot.
!
Before assembly, check that the product and all of its components have
not been damaged during transportation. Should any part be damaged,
keep out of reach of children and do not use.
!
Make sure that the adult using the product knows exactly how it works.
!
The product is ready for use only when all locking mechanisms are en-
gaged. Make sure they are securely engaged before use.
!
When your child is unattended and the product is in "Crib Configura-
tion", always make sure that the side is raised and locked in the closed
position and aligned with the upper perimeter of the crib.
!
When the product is being used, and above all in "Crib Configuration",
the wheels must always be locked.
!
All operations for opening, adjusting, fastening and installing the prod-
uct must be carried out by an adult.
13
!
Before using in the "Bedside sleeper Configuration" (fastened to bed),
make sure the product is fastened and installed correctly.
!
Check the tightness of the attachment system before each use by pull-
ing the bedside sleeper in a direction away from adult bed.
!
The fixing straps are included in the packaging. Other fastening systems
should not be used.
!
To prevent danger of choking due to the child's head being trapped,
when the crib is in the "Bedside sleeper Configuration" (fastened to the
bed) it should be properly fastened to the parents' bed with the fixing
straps as explained in the instruction booklet.
!
Before placing the child inside the crib when the product is in the "Bed-
side sleeper Configuration" (fastened to the bed), be sure that the fixing
straps are fastened and tightened correctly. The product must be attached
to the parents' bed frame/support and there should be no gaps between
the lowest part of the Bedside sleeper crib and the parents' mattress.
!
If there are gaps between the lowest part of the Bedside sleeper crib
and the parents' mattress, DO NOT use the product.
!
Do not fill any spaces or gaps between the parents' mattress and the
crib with pillows, blankets, bedsheets or any other material that may
cause a choking hazard.
!
DANGER!-Always completely raise the drop side when not attached to
the adult's bed.
!
WARNING ! –Placing additional items in the product may cause suffoca-
tion.
!
WARNING! To avoid hazards from the child's neck being caught on the
top rail on the side that is next to the adult bed, the top rail must not be
higher than the adult bed mattress.
!
WARNING!- To avoid the risk of your child being strangled the attach-
ment system to the adult's bed shall always be kept away from and out
of the crib.
!
A bedside sleeper shall ONLY be used once it has been securely at-
tached to the adult's bed or when the drop side is in the fully raised
position to prevent the child falling from height.
!
The product must always be placed on a horizontal surface. Never leave
the product on a sloping surface with your child inside.
14