First Ride; Charging; Storage Compartment - Segway miniPLUS Manual De Usuario

There are safety risks when learning to ride the miniPLUS. You must read the
5

First Ride

Safety Instructions and follow the New Rider Tutorial in the App before your first ride.
For your safety, your miniPLUS is not activated at this time and will beep occasionally
after Power ON.
Until activated, the miniPLUS maintains a very low riding speed and steering
sensitivity, and should not be ridden. Install the App on your mobile device (with
Bluetooth 4.0 or above), connect to the miniPLUS with Bluetooth, and follow the App
instructions to activate your miniPLUS and follow the training procedures.
Scan the QR code to download the App (iOS 8.0 or above, Android™ 4.3 or above).
1 Install the App and register/login.
3 Click "Vehicle"→"Search device" to connect to
your miniPLUS. The miniPLUS will beep when
the connection is successful. The Bluetooth
icon will stop blinking and remain illuminated.
If your miniPLUS intermittently sounds an alarm, stop riding and check the App (if connected) for details.
08
2 Power ON the miniPLUS. The Bluetooth icon
blinking indicates the miniPLUS is waiting for
a connection.
Vehicle N Fans Club Discover Me
6

Charging

Do not connect the charger if the charge port or charge cable is wet.
Charge port
Your miniPLUS is fully charged when the LED on the charger changes from red (charging) to green
(trickle charge).
7

Storage Compartment

1. Opening and Closing: to open, first press the button, then pull o the cover; to close, insert the bottom
of the cover first, then press closed until it clicks.
Using: stow the remote control or camera inside the storage compartment, as shown. Use the retaining
2.
strap to hold the item securely.
1
The storage compartment is water resistant, but not waterproof. It cannot prevent extensive rain or water
from entering.
Open the rubber cap Insert the plug
into the socket
2
Remote Camera
09