To Attach The Saw Blade - Husqvarna 555FX Manual De Usuario

2. Attach the saw blade guard (E) with 4 bolts (F) in the
holder (A).
B
C
D

To attach the saw blade

1. Put the drive disc (A) on the output shaft.
2. Turn the output shaft to align 1 of the holes in the
drive disc with the related hole in the gear housing.
3. Put the locking pin (B) in the hole to lock the shaft.
4. Put the saw blade (C) and the support flange (D) on
the output shaft.
E
A
B
5. Make sure that the drive disc and support flange
engages correctly in the center hole of the grass
blade.
6. Attach the locknut (E).
1346 - 004 - 03.06.2021
A
F
E
D
C
7. Tighten the locknut with the socket wrench. Hold the
shaft of the socket wrench near the blade guard.
Tighten in the opposite direction to how the cutting
attachment rotates. Tighten it to a torque of 35-50
Nm.
To attach the shredder blade guard and the
shredder blade (555RXT, 555FRM)
1. Install the holder (A) and bracket (B) with 4 bolts (C)
on the gear housing.
C
B
A
2. Attach the shredder blade guard (D) with 4 bolts.
D
13