Wm1 (×1) - Sony SU-WL855 Información Para La Instalación

 Attaching the Wall-Mount
Bracket to the Dry Wall with Studs
WM4
WM1
Installing the Lateral Shift
Bracket to the Wall
1
Decide on the installation
location.
Make sure that the wall has enough space
for the TV and is capable of supporting a
weight of at least six times that of the TV.
• Refer "Measurement for Lateral Shift
Bracket installation on the wall" on page
19.
• Refer to your TV's Reference Guide for the
TV's weight.
Note
 When your TV is installed on the wall, the upper
side of the TV slightly leans forward.
 We recommend you to check the position of TV in
the viewing environment.
2
3
Align
WM4
four marks aligned with the
studs.
× 4
Note
 Use a level to check whether
4
Drill upper pilot holes on the
marks.
Note
 Pilot holes must be drilled to a depth of 75 mm
(3 inch), using a 5.5 mm (7/32 inch) diameter drill
bit.
− 8 (US) −
to the wall and make
WM4
WM4
is level.
× 2
5.5 mm
(7/32 inch)
75 mm
Stud or
(3 inch)
Reinforcement