Automatic Bidet Wand Cleaning Setup; Power Save Setup - Kohler K-7421 Guia De Instalacion

Feature Setup (cont.)
Press the [ok] button.
Change the minutes using the up and down arrow.
Press the [ok] button.

Automatic Bidet Wand Cleaning Setup

NOTE: Automatic Wand Cleaning arrives enabled. When enabled,
the bidet wand will automatically be cleaned at the programmed
time.
On the back of the remote control, press the menu button.
Scroll down to [Cleaning].
Press the [ok] button.
Scroll down to [Yes].
Press the [ok] button.
Scroll down to [UV Wand clean].
Press the [ok] button.
To enable the automatic bidet wand cleaning option, select [Run
at 00:00] to run the cleaning cycle daily at midnight, [Run at
12:00] to run the cleaning cycle at noon.

Power Save Setup

NOTE: The Power Save feature arrives disabled. When enabled the
toilet will enter power save mode after the selected amount of time
has passed. Power save mode deactivates the heated seat and light
options until the toilet is used.
On the back of the remote control, press the menu button.
Scroll down to [Settings].
Press the [ok] button.
Scroll down to [Yes].
Press the [ok] button.
Scroll down to [Power Save].
Press the [ok] button.
To enable the power save option, scroll to [4, 8, 12 hours].
To disable the power save option, scroll to [never].
1197250-2-B 16 Kohler Co.