Safety Rules - GE Kinsey 20444 Manual Del Usuario

1. To reduce the risk of electric shock, ensure electricity has
been turned off at the circuit breaker or fuse box before
beginning.
2. All wiring must be in accordance with the latest edition of
National Electrical Code "ANSI/NFPA 70" and local electrical
codes. Electrical installation should be performed by a
3. WARNING: To reduce the risk of fire, electric shock or
personal injury, do not use this fan with any solid state fan
speed control device, or variable speed control.
4. CAUTION: To reduce the risk of personal injury, use only
the screws provided with the outlet box.
5. The outlet box and support structure must be securely
mounted and capable of reliably supporting a minimum of
15.9 kg (35 lb.). Use only UL Listed outlet boxes marked "FOR
FAN SUPPORT."
6. The fan must be mounted with a minimum of 2.1m (7 ft.)
clearance from the trailing edge of the blades to the
7. Avoid placing objects in the path of the blades.
8. To avoid personal injury or damage to the fan and other
items, be cautious when working around or cleaning the fan.
9. Do not use water or detergents when cleaning the fan or
fan blades. A dry dust cloth or lightly damped cloth will be
suitable for cleaning.
10. After making electrical connections, spliced conductors
should be turned upward and pushed carefully up into
the outlet box. The wires should be spread apart with
the grounded conductor and the equipment-grounding
conductor on one side of the outlet box and ungrounded
conductor on the other side of the outlet box.
11. All screws must be checked and re-tightened where
necessary during installation.
12.This fan is suitable for room sizes up to 144 square feet
(13.38 square meters).
2

Safety Rules

Read and Save These Instructions
r.
WARNING: To reduce the risk of
re, electric shock or personal
injury, mount fan to outlet box
marked acceptable for fan
support and use the screws
provided with the outlet box.
WARNING: To reduce the risk
of personal injury, do not bend
the blade arms (also referred
t
the brack
not insert for
between r
WARNING: To reduce the risk of
re, electric shock or personal
injury, mount to outlet box
marked "acceptable for fan
suppor
less
provided with the outlet box.
Most outlet boxes commonly
used for the suppor
res are not acceptable for
fan support and may need to be
r to the complexity
of the installation of this fan, a
str recommended.
b
rews