Attaching The Fan Blades; Installing The Light Kit - GE Kinsey 20444 Manual Del Usuario

ATTACHING THE FAN BLADES

1.
blade bracket
Insert the blade (R) through the slot in the
bottom band, align the holes in the blade (R)
and the blade bracket, secure the blade to
the blade bracket with three screws (F) and
fiber washer (G) provided. Repeat this
procedure with the other blades (R).

INSTALLING THE LIGHT KIT

. 1
U
Attach the mounting plate (U) to the housing.
Remove 1 of the 3 mounting plate screws
(Y ) from the bottom of motor assembly (T)
and keep it for future use. Loosen the other
2 screws (do not remove). Guide the pin
connector through the central hole of
the mounting plate (U). Place the key holes
on the mounting plate (U) over the 2
mounting plate screws (Y) previously
loosened, turn the mounting plate (U) until
it locks in place at the narrow section of the
key holes. Secure by tightening the 2 screws
previously loosened and the one previously
removed.
12
Fan Installation
R
G
F
. 2
U
T
Y
Z
Attach the light kit.
Remove 1 of the 3 light kit mounting
screws (Z) from the mounting plate (U)
and keep it for futur
other 2 screws (do not remove). While
holding the LED light kit (V) under the fan
motor assembly, make the 2-pin wire
connections: Blue to blue and white to
white. Place the key holes on the LED light
kit (V) over the 2 light kit mounting screws
previously loosened, turn the LED light
(Z)
kit (V) until it locks in place at the narrow
section of key holes. Secure by tightening
the 2 screws previously loosened and the
one previously removed.
NOTE: Before starting installation,
disconnect the power by turning
off the circuit breaker or removing
the fuse at fuse box. Turning power
off using the fan switch may not be
suf cient to prevent electric shock.
. 3
V
W
Install the glass. Raise the glass shade
(W) up against the light kit (V) and secure
it to fan by twisting glass (W) clockwise
until snug. Do not over-tighten.
WARNING: Make sure to fully secure
the glass shade in place by turning
the shade clockwise until it is locked
in place and can no longer be rotated.
V