3. Operación
3.1 Accionamiento
Para prender el equipo siga las instrucciones abajo :
1-. Verifique si TODAS las protecciones están debidamente posicionadas y la puerta
cerradas
2- Conecte el equipo a la red eléctrica ;
3 - Presione la llave Prende/Apaga No. 01 (Fig 02) para la posición "I" y la maquina se
prende.
30
FIGURA 02
4.3.2 Precau ons
Check the motor and sliding or turning parts of the machine in case of abnormal noises.
Check the tension of the belts and chains and replace the set when belts or chains show
signs of wearing.
When checking the tension of belts or chains DO NOT insert your fingers between belts
and pulleys, nor between the chains and gears.
Check protec ons and safety devices to make sure they are working properly.
4.4 Opera on
4.4.1 Warnings
Do not use the machine with long hair that could touch any part of the machine. This might
lead to a serious accident. Tie your hair up well and/or cover it with a scarf.
Only trained or skilled personnel shall operate this machine.
Never touch turning parts with your hands or any other way ,
NEVER operate the machine without any original safety devices under perfect condi ons.
4.5 A er Finishing The Work
4.5.1 Precau ons
Always TURN THE MACHINE OFF before cleaning by removing the plug from the socket.
Never clean the machine unless it has come to a complete stop.
Put all the components back to their func onal posi ons before turning the machine ON
again.
Check the level of liquids.
Do NOT insert your fingers in between belts and pulleys nor chains and gears.
4.6 Maintenance
01
4.6.1 Danger
Any maintenance with the machine in working situa on is dangerous. TURN IT OFF BY
PULLING THE PLUG OFF THE SOCKET DURING MAINTENANCE.
Always remove the plug from the socket in any emergency situa on.
4.7 Warning
Electrical or mechanical maintenance has to be undertaken by qualified personnel.
The person in charge of maintenance has to be sure that the machine is under TOTAL
SAFETY condi ons when working.
IMPORTANT
19