Caracteris Cas Tecnicas - Skymsen SL-218 Manual De Instrucciones

1.3 Caracteris cas Tecnicas

CARACTERISTICAS
Voltaje
Frecuencia
Potencia
Altura
Ancho
Profundidad
Peso Neto
Peso Bruto
Ancho Max. de Corte
Altura Max. de Corte
Dimensiones Abiertas
Distancia del suelo hasta la mesa
28
TABLA 01
UNIDAD SFL-218
V 110/220
Hz 60
CV 1
mm 1580
mm 715
mm 805
kg 73
kg 92
mm 240
mm 240
(L x P) mm 735 x 805
mm 895
PROBLEMS
Lack of power.
The equipment does not
switch on.
Problem with the internal or
external electric circuits .
Problem with the internal or
Smoke or burn smell.
external electric circuits
Belt slipping on pulleys.
Machine switch on but when
product touches the blade it
Damaged motor.
stops or runs slowly.
Damaged bearing
Unusual noises. Belt slipping on wheels
Wrong blade weld
Damaged Cord Problem during transporta on.
Dirty blade or wheel
Blade break frequently
Wheel damaged
Dirty blade or wheels
Blade with wrong tension
Difficul es to cut the product
Blade is not on wheels center
Blunt blade
TABLE 02
CAUSES SOLUTIONS
Check if there is electric
power.
Call Technical Assistance.
Call Technical Assistance.
Check the Blade tension
Call Technical Assistance
Call Technical Assistance
Call techical Assistance
Change the blade
Call Technical Assistance.
Clean , see item 3.3
Call Technical Assistance
Clean, see item 3.3
Adjust the blade tension, see
item 3.2.5
Call Technical Assistance
Change the blade
21