GE 29418 Guía De Uso página 9

2. Plug one end of the coiled handset cord
into the handset and the opposite end
into the base.
3. Set the RINGER 1 and RINGER 2 volume
switches located at the back of the base
to the desired loudness.
• HI = Default, loudest sound.
• LO = Sound will be the lowest.
• OFF = Telephone will not ring.
4. Set the TONE/PULSE switch to TONE if
you have Touch-Tone service or to PULSE
if you have rotary service.
5. Press the Line 1 button if the Line 1
telephone cord is connected. Otherwise,
press the Line 2 button.
6. The unit is properly installed if you pick
up the handset and hear the dial tone.
Otherwise, recheck all installation steps.
3
4
5
2
9