Wall Mount Installation - GE 29418 Guía De Uso

W M
ALL OUNT
The speakerphone can be mounted on a
wall plate (not included).
1. (See Figure 1 on page 8) If you have one
dual-line phone jack (RJ14C).
Plug one end of the white straight line
cord into the jack marked LINE 1+2 on
the base and the other end into the
modular phone jack.
(See Figure 2 on page 8) if you have two
single-line phone jacks (RJ11C).
Plug one end of the grey straight
telephone line cord into the jack marked
LINE 1+2 on the back of the base. Plug
the white straight line telephone cord
into the jack marked LINE 2 on the back
of the base. Then plug the other end of
each telephone line cord into the two
single line modular phone jacks.
2. Turn the phone over and press down and
out on the top of the wall mounting
bracket. Lift the bracket off.
3. Reverse the wall mounting bracket so
that the thickest part is at the bottom of
the base.
4. Replace the wall mounting bracket by
inserting the top end in first and slide the
base down.
10
I
NSTALLATION
1
4