Getting Started - Magnitone Pulsar Manual De Instrucciones

GETTING STARTED

A
TO INSERT THE BRUSH HEAD
1. Carefully line up the round points on the inside of the
handle (A) with the bottom of the track (B) on the brush
head.
2. Push the brush head down into place.
3. Turn the brush head clockwise for 1/3 turn until you
feel the brush head pulls downwards and is held
firmly in place.
4. You should no longer be able to remove the brush head
by pulling.
5. Turn the brush on and you should see the bristles
moving very fast back and forward
TO REMOVE THE BRUSH
1. Grip the brush head tightly.
2. Turn the brush head anti-clockwise for 1/3 turn until the
brush becomes loose.
3. Pull and remove
TIP: You may find it easier to insert and remove the brush
head with the protective cap on the brush to help grip it.
USING THE BRUSH FOR THE FIRST TIME
Your Magnitone Pulsar comes part charged for your
convenience. We recommend that to maximise its battery
life, you recharge your brush for the first time for 24 hours.
We recommend that if you are unsure about your skin
B
condition that you use the SENSITIVE on your face and
other sensitive areas for the first 3 days to allow your
skin time to adjust to the new cleansing method of using
Magnitone Pulsar.
We recommend no longer than 1 minute cleansing time
twice a day for the first 3 days on face and other body
areas. Thereafter you may increase this time to up to 2
minutes for face and other body areas.
The PulseLift MASSAGE mode should not be added to
cleansing time. Use PulseLift MASSAGE mode instead of
the standard cleansing modes in areas that require special
attention.
IMPORTANT
You may experience some adverse changes to your skin
condition after the first few days of using Magnitone Pulsar.
This is completely normal as your skin adjusts to the new
cleansing method. This happens because Magnitone Pulsar
is slowly bringing up deep-rooted and oily impurities
from your pores onto the surface of the skin. You should
switch to the sensitive setting until any outbreaks clear and
moisturise regularly after use.
If you get any sore or hyper-sensitive patches occurring,
you should stop using the product for a couple of days or
until they calm down.
11