Getting Started - Magnitone LONDON Go Bare Manual De Instrucciones

Ocultar thumbs Ver también para LONDON Go Bare:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

EN
PLEASE READ OUR INSTRUCTION MANUAL BEFORE
BUFFING AND SHINING YOUR NAILS
Warnings Before Use
• Manicure System is designed for use on fingernails, toenails and calluses. Do not use the
device on any other part of the body.
• Do not use Manicure System on broken or wet nails.
• For hygiene reasons restrict the use of your Manicure System to one person!
• If you have diabetes, poor blood circulation, skin conditions or any other medical issues
please consult your doctor before using the Manicure System
• Do not use the device on the same part of your nail for more than 2 to 3 seconds at a time.
• Discontinue using your Manicure System immediately if any discomfort, pain or irritation
occurs.
• This device is not intended for children or persons with reduced physical, sensory or mental
capabilities.
• Do not place or store the device in direct sunlight or anywhere there is excessive heat or
moisture.
• Keep your unit away from children and store in a cool dry place.
• Do not turn on the unit if the roller is not attached.
• Keep the unit well away from your hair, eyebrows, eyelashes
• Do not disassemble or modify your Manicure System
How to install and replace the batteries
1
• (1) Open the battery cover at the back of the device.
• (2) Place 2 x AA batteries in the device according as shown on the markings.
• (3) Place the battery cover back making sure you hear a 'click' to ensure it is locked in place.
• To remove batteries, open the cover and tap the unit downwards gently on a flat surface until they come
out.
2
3
EN

GETTING STARTED

How to Manicure Your Nails
4
• Wash, clean and dry your nails.
• (4) Remove the protective cap and put the BUFFING HEAD (pink) onto your
Manicure System.
• (5) Press and hold the power button for 2 seconds to turn on the device
• (6) Place the roller gently on the surface of your nail and glide the roller slowly
and steadily over each nail, moving from side to side to remove uneven surface
texture.
8
• (7) Press and hold the button again to switch off the device and insert the
POLISH HEAD (white)
• (8) Press and hold the power button for 2 seconds to turn the device on. Then press the power button
again for high speed setting.
• Glide the roller slowly and steadily over your nail moving from side to side until you see the nail start to
shine.
How to File your Nails & Remove Hard Skin
9
• Wash, clean and dry your nails fully.
• (9) Remove the protective film from the head and put the FILING DOME onto your Manicure System.
• (10) Press on the power switch for 2 seconds to turn on the device.
• (11) Glide the roller across the end of the nail ends until the edge of your nail achieves your desired
smoothness.
• For use on hard skin, press the button again to go to high speed setting. Glide the dome over the rough
skin repeatedly until it is smooth. DO NOT hold the head in one place.
• Turn your Manicure System off and replace the cap.
5
6
10
11
7

Publicidad

Tabla de contenido
loading

Tabla de contenido