Front Runner FAJK007 Manual Del Usuario página 12

FIT AND SECURE
2
2.1
8
2.2
FINISH
3
Congratulations! You did it. Take a step back and admire your work!
INSTALL OTHER VEHICLE AND RACK ACCESSORIES
4
Now's the time to visit your favorite Front Runner Dealer in person or online.
Be sure to tag us. We love to see our gear in action! #FrontRunnerOutfitters #BornToRoam
FAJK009_REV_A00
3
7
6
2
3
4
5
Share your adventures on:
Align the holes in the Front Pillar Bracket
mount plate with the holes on the vehicle.
Loosely assemble the Pillar Bracket to the
vehicle using M8 x 45 Button Head Bolts, M8
SS Spring Washers, M8 x 16 x 1.6SS Flat
Washers and the spacers (Items 3, 6, 7 & 8)
as shown.
Make sure the Front Pillar Brackets are
straight, using the door shut line as a guide
before fully tightening the four M8 Button
Heads Bolts.
Do this on both left and right side of the
vehicle.
Fit your Roof Rack to the Front Support
Arms using M8 x 20 Hex Bolts, M8 x 16 x
1.6SS Flat Washers and M8 Nyloc Nuts
(Items 2, 3 & 4) as shown.
Center the rack and tighten fully. Use M8
Nut Caps (Item 5) to finish off the nuts.
3 © 2020 FRONT RUNNER VEHICLE OUTFITTERS