Tools And Materials; Before You Begin - Kohler K-10950 Guia De Instalacion

Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don't
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.

Tools and Materials

Adjustable Wrench
Thermometer

Before You Begin

NOTE: The faucet shown in the following installation procedures
may differ from your actual product. However the installation steps
apply to all faucets packed with this guide.
Observe all local plumbing and building codes.
Shut off the main water supply.
Carefully inspect the waste and supply tubing for any sign of
damage.
The faucet will not function properly with lavatories that have a
lip height of more than 1" (2.5 cm).
For this faucet to function properly, install the faucet so the
sensor points directly toward the user.
Before installation, unpack the new faucet and inspect it for
damage. Remove and dispose of the protective tape covering the
sensor eyes on the front of the faucet body.
Return the faucet to the carton until you are ready to install it.
For new installations, install the faucet before installing the
lavatory.
1025498-2-E
Pliers Drill
2-1/2" D.
Hole Bit
2 Kohler Co.