KlipXtreme TwinBuds KHS-700 Manual Del Usuario página 6

the wireless connection, making the LED
change to blinking blue.
8. If after 60 seconds the pairing process fails,
please repeat steps 1 through 6 as described
above.
9. The headset will automatically go into
standby mode after a short period of
inactivity to save battery life.
10. You only need to pair the earphones with
your phone once, as it will re-pair
automatically.
11. The automatic re-pairing feature will allow
the headset to be reconnected after being
switched back on or when placed again
within wireless range.
4.2. Call management using your
wireless earphones
• When there is an incoming call, your phone
will ring, the blue LED will blink once every
5 seconds, accompanied by the "Incoming
call" prompt through the left earphone.
• Briefly press the Multifunction button on
the left earphone to pick it up. You may also
press the answer button on your cellular
phone to receive the incoming communica-
tion in your headset.
Note: Audio will only come out of the left
side bud.
• To end a call, simply press the Multifunction
button on the left earphone once again. The
"Call ended" voice prompt will let you know
that the phone is hung up.
• To ignore an incoming communication and
send the caller to voicemail, press and hold
the Multifunction button on the left
earphone for about one second. The "Call
rejected" voice prompt will be heard to
confirm your selection.
• "Redialing" will be heard when you press and
hold the Multifunction button on the left
earphone to dial the last number called.
4.3 Music playback and voice command
using your wireless earphones
• Briefly press the Multifunction button on
the left earphone to reproduce and stop
audio playback.
• Briefly press the Multifunction button on
the right earphone to play the next track
you want to listen to.
• To enable voice command in supported
devices, press and hold the Multifunction
button on the left earphone for about one
second.