To Clean And Lubricate The Blades; To Examine The Blades - Husqvarna HA200 Manual Del Usuario

• Use Husqvarna special grease. Speak to your
servicing dealer for more information.
• Add the grease through the grease nipple.
CAUTION: Do not fill the gearbox fully.

To clean and lubricate the blades

1. Clean the blades from unwanted materials before
and after you use the product.
2. Lubricate the blades before long periods of storage.
Note: Speak to your servicing dealer for more
information about recommended cleaning agents and
lubricants.

To examine the blades

1. Remove the screw from the gearbox.
10
2. Put the combination wrench in the gearbox and turn
clockwise and counterclockwise. Make sure that the
blades move freely.
3. Examine the edges of the blades for damages and
deformation.
4. Use a file to remove burrs on the blades.
5. Install in the opposite sequence.
1183 - 001 - 20.03.2020