WARNING: Put on protective gloves. The
air-filter oil can cause skin irritation.
1. Put the air filter in a plastic bag.
2. Put the oil in the plastic bag.
3. Rub the plastic bag to supply the oil equally across
the air filter.
4. Push the unwanted oil out of the air filter while in the
plastic bag.
To lubricate the gear housing
•
Use Husqvarna special grease. Speak to your
servicing dealer for more information about
recommended grease.
•
Add the grease through the grease nipple.
Transportation, storage and disposal
Transportation and storage
•
Always allow the product to cool down before
storage.
•
For storage and transportation of the product and
fuel, make sure that there are no leaks or fumes.
Sparks or open flames, for example from electrical
devices or boilers, can start a fire.
•
Always use approved containers for storage and
transportation of fuel.
•
Empty the fuel before transportation or before long-
term storage. Discard the fuel at an applicable
disposal location.
12
CAUTION: Do not fill the gear housing fully.
To clean and lubricate the blades
1. Clean the blades from unwanted materials before
and after you use the product.
2. Lubricate the blades before long periods of storage.
Note: Speak to your servicing dealer for more
information about recommended cleaning agents and
lubricants.
To examine the blades
1. Remove the cap on the gear housing.
2. Make sure that the blades move freely. Put the
combination wrench in the gear housing and turn
clockwise and counterclockwise.
3. Examine the edges of the blades for damages and
deformation.
4. Use a file to remove burrs on the blades.
5. Attach the cap on the gear housing.
•
Attach the transport guard during transportation and
storage.
•
Remove the spark plug cap from the spark plug.
•
Attach the product during transportation. Make sure
that it cannot move.
•
Clean and do servicing on the product before long-
term storage.
906 - 002 - 19.03.2019