Security Instructions - Zipper Maschinen ZI-FKS315 Manual De Instrucciones

13.2

Security instructions

Missing or non-readable security stickers have to be replaced immediately!
The locally applicable laws and regulations may specify the minimum age of the
operator and limit the use of this machine!
To avoid malfunction, machine defects and injuries, read the following security instructions!
 Keep your work area dry and tidy! An untidy work area may cause accidents. Avoid
slippery floor!
 Make sure the work area is lighted sufficiently!
 Work only in a well ventilated area!
 Do not overload the machine!
 Avoid abnormal working postures! Make sure you stand squarely and keep balance
at all times.
 Keep away from the running saw blade!

Always stay focused when working. Reduce distortion sources in your working
environment. The operation of the machine when being tired, as well as under the
influence of alcohol, drugs or concentration influencing medicaments is forbidden.
 Only one person shall operate the machine
 The machine must be operated only by trained persons (knowledge and
understanding of this manual), which have no limitations of motor skills compared
with conventional workers.
 Make your workshop childproof!

Make sure there is nobody present in the dangerous area. The minimum safety
distance is 2m
 Wear suitable work clothes! Do not wear loose clothing or jewelry as they might be
caught and cause severe accidents!
 Wear a hair net if you have long hair!
 Loose objects can become entangled and cause serious injuries!
 Use personal safety equipment: ear protectors, safety goggles, work wear, safety
gloves (EN 388, class 3111) dust mask when working with or on the machine.
 Operation with gloves forbidden!
 Gloves may only used at maintenance work and changing the saw blade
 Never leave the machine running unattended! Before leaving the working area
switch the machine off and wait until the machine stops Die laufende Maschine darf
nie unbeaufsichtigt sein!
 Always disconnect the machine prior to any actions performed at the machine.
 Avoid unintentional starting

Do not use the machine with damaged switch
 The plug of an electrical tool must strictly correspond to the socket. Do not use any
adapters together with earthed electric tools
 Each time you work with an electrically operated machine, caution is advised! There
is a risk of electric shock, fire, cutting injury;
 Protect the machine from dampness (causing a short circuit)!
 Use power tools and machines never in the vicinity of flammable liquids and gases
(danger of explosion)!
 Check the cable regularly for damage
 Do not use the cable to carry the machine or to fix the work piece

Protect the cable from heat, oil and sharp edges
ZIPPER MASCHINEN GmbH
ZI-FKS315
www.Zipper-Maschinen.at
SAFETY
34