Trouble Shooting Guide; Care Of Discs - Naxa NX-831 Manual De Instrucciones

Select to play by menu
1. Put in disc, the machine searches disc information
and main menu displays on screen. Press number key
from 1 to select picture, press play key to make sure.
2. Press direction key to select picture, then press
ENTER key to make sure.
3. In condition of stop, select direction key to select
other pictures.
4. In condition of stop, select the first line file item on the
right, then press play key to return to upper menu
Other functions:
When playing picture CD. The machine allows pause,
repeat and browsing. Use the Next or Previous key to
browse. Press ZOOM key to enlarge picture. While in
zoom mode press fast forward of backward key to
control the zoom scale. To move the view area of the
enlarged picture, use the direction keys.
In view mode, pictures can be rotated with direction
keys. The type of slide show transition can be selected
from the navigation menu or simply by pressing
PROGRAM key.

8. Trouble shooting guide

For your convenience, we have enlisted some points
to help solve problems you might encounter while using
DVD player.
No sound
* Make sure the good connection between player and
other appliances such sa power amplifier or TV.
* Make sure the right operation on TV and power
amplifier.
No picture
* Make sure the good connection between player and
other appliances such as TV.
* Make sure TV works well.
* Make sure the DVD player is in correct mode,
otherwise,
press VIDEO button several times to solve it.
Disc does not play
* Make sure the disc is loaded correctly (label side is
facing up on the disc tray)
* Make sure the disc is clear.
Remote controller does not work
* Move the obstacle between player and remote
controller away.
* Point the remote controller at the remote control
sensor.
* Check the battery.
Picture dividing
* Make sure the disc is clear and no any scratch on it.
* For the player is controlled by micro-computer, if
encountering problem, switch off the power first, and
switch on again in a few second, by then if no mistake is
displayed, the player could work well.
SAFE MODE
The main unit will be in safe mode of it does not respond
to any operation due to interference by accident or
strong noise signals, To resolve this problem, you must
pull out the power cord and plug it in again later 10
seconds.
NOTES ON CONDENSATION
Occasionally, condensation may occur within the device,
resulting in drops of water forming on the optical pick-up
inside the unit. This is much like the condensation that
takes place on a glass of cold water. This condensation
may affect the overall performance of the machine.
Condensation occurs when:
1) It is moved from a cold area to a warm area.
2) Its surrounding area is exposed to a sudden change in
temperature, for example, when located near an air
conditioner.
3) In summer, the unit is moved from a hot and humid
environment immediately into an air-conditioned room.
4) The device is in a humid environment.

9. CARE OF DISCS

Protection
a. When loading or removing the discs, always hold them
by the center and edge.
B. Do not stick or write anything on the surface. Protect
discs against any fingerprint.
Cleaning
Wipe the discs from time to time using a soft cloth.
Always wipe from the center toward the edge.
Storage
a. Never warp the discs. During no-use periods, store
them in their cases, while should be kept vertically. Do
not expose discs to high temperature, dampness or
extremely low temperature, or else to may cause
damage to the discs.
b. Do not expose discs to direct sunlight.
The DVD player contains laser devices. The top cover of
the DVD module acts as a protective housing. Laser
radiation is dangerous when the top cover is removed or
opened. Avoid direct exposure to beam during service or
repair.
-11-