auna Areal Bar Connect Manual De Instrucciones página 51

Network
Wireless Network Configuration
Enable / disable WiFi network. When you enable the WiFi network, the
system will connect automatically.
You may refer to the section 3, Getting Started for the network setting.
Wireless Network (WPS PBC)
If you are using a router with WPS/QSS button, you may set up the network
connection simple via WPS function. Enter it go to press the WPS/QSS
button on your router within 120seconds. The connection between the
router and ArealBarConnect will then be configured automatically.
Manual Configuration
You can choose DHPC (which IP assigned automatically) or manually input
IP address for wireless network connection.
When you select manual setting for wired connection, the following to be
entered:
1. SSID (the name of Access Point);
2. IP Addressd
3. Subnet Mask;
4. Default Gateway;
5. Preferred DNS Server;
6. Alternate DNS Server.
You may choose (Manage) specific network if you have setup more than one
network connection within an area.
EN
51