auna Areal Bar Connect Manual De Instrucciones página 54

EN
Display
Set the display to Color display or Monochrome display.
Power Management
Configure to go to standby mode automatically during in the menu or/and
without Wifi signal.
Choose the power management timer (5/15/30mins) to set the duration
of the radio to switch standby mode automatically when you are not
controlling it.
Choose "Turn Off" to ignore the power management function.
Sleep Timer
Turn off or set the sleep time of 15/30/60/90/120/150/180 minutes. Once
the time is set, there will be a bed icon with remaining minutes at the top
right comer and ArealBarConnect will turn to standby then.
Buffer
Configure the buffer time of the music playback, 2/4 /8 seconds.
Weather
ArealBarConnect is able to display the current weather information (refer
to 5.9.1) under standby mode. Turn on Standby Display and set Temperature
Unit (°C or °F) to get the weather displayed at the standby mode.
When it is turned on, the current time and the current weather will display
in alternative 10 seconds.
Playback Setup
Select the playback mode of media center – Off (no repeat or shuffle),
Repeat all , Repeat one, or Shuffle.
DLNA Setup
Default device name for DLNA is ArealBarConnect. You may rename it for
DLNA setup on the PC or mobile.
Equalizer
Default equalizer is Normal. You may change to Normal, Flat, Jazz, Rock,
Soundtrack, Classical, Pop, or News.
Resume When Power On
The system is default to resume the main menu when switching on the unit.
If turn this setting on, the system will remain in the internet radio playback.
If you were listening to internet radio or media center before switch off the
unit.
54