SRTZ260F
8. Operation
following instructions when using
your trimmer.
• Never hold the trimmer in a way in
• Never allow the blades to come into
• Always be sure to turn off the engine
• Always wear work gloves made of
• Always place the blade cover
• Falling branches may fall onto the
• The thickness of branches which may
be cut using this trimmer is limited to up
to approximately 3/16" (4.8mm). Never
try to cut branches thicker than this, as
doing so may result in damage to the
trimmer.
US-12
which the blades are pointed
towards someone else.
proximity with your body while the
engine of the trimmer is in operation.
before changing the angle of the
blades, removing branches which
have become stuck in the blades, or
at any other time when coming into
close proximity with the blades.
leather or some other sturdy material
when using the trimmer.
provided with the trimmer over the
blades when not in use.
face or into the eyes, resulting in
injuries, scratches, and cuts, and
for this reason you should always
be sure to wear a helmet and face
protector when using your
trimmer.
IMPORTANT