LUCCI Air AKMANI Manual Del Usuario página 4

Akmani Installation Instructions
If there isn't an existing outlet box, then install one using the following instructions:

Disconnect the power by removing

Secure the outlet box (A) (not included) directly to the building structure. Use appropriate fasteners and
materials (not included). The outlet box and its bracing must be able to fully support the weight of the
moving fan (at least 35 lbs). Do not use a plastic outlet box.

Figures below show three different
Fig. 2
This fan hanging system supports a
NOTE: If you are installing the ceiling fan on a sloped ceiling, you may need a longer downrod to maintain
proper clearance between the tip of the blade and the
NOTE: The ceiling fan must be installed in a location so that the blades are spaced 300mm from the tip of the
blade to the nearest objects or walls.
NOTE: For angled ceiling installation, the opening of the mounting bracket (B) must be pointed toward the
peak.
To hang your fan where there is an existing fixture but no ceiling joist, you may need an installation hanger
bar (C) as shown in Fig.5. Make sure the hanger bar you purchase has been designed for use with ceiling
fans.
3 | P a g e
INSTALLING THE MOUNTING BRACKET
the fuses or turning off the circuit breakers.
ways to mount the outlet box (A) (not included).
Fig. 3
maximum 20 degree angled
Fig. 5
Angled ceiling
Maximum 20°
ceiling installation. Fig. 4
ceiling.
Fig. 4