Olympus E-PM1 Manual Básico página 6

Attaching a lens to the camera
EN
1
Remove the body cap from the camera and the rear cap from the lens.
2
Attach a lens to the camera.
#
Cautions
• Make sure the camera is turned off.
• Do not press the lens release button.
• Do not touch internal portions of the
camera.
• Align the lens attachment mark (red) on the camera
with the alignment mark (red) on the lens, then
insert the lens into the camera's body.
• Rotate the lens in the direction indicated by the
arrow until you hear it click.
3
Remove the lens cap.
Removing the lens from the camera
While pressing the lens release button, rotate the lens in the
direction of the arrow.
g "Interchangeable lenses" (P. 100)
6 EN
2
1
Lens
attachment
mark
Alignment
mark
1
1
2
1
2
Lens release button
2
1