Installation And Connection - Oase StreamMax Classic 2000 Instrucciones De Uso

- EN -
ACCESSING THE UNIT
DISMANTLING THE FLOW ADAPTER
The flow adapter concentrates the flow. The pump can be operated with or without the flow adapter.
B
1. Turn the flow adapter slightly.
2. Pull it off the pump basket.

INSTALLATION AND CONNECTION

FASTENING THE PUMP WITH SUCTION CUPS
C, D
• Fit the supplied suction cups with a twisting movement.
– The suction cups adhere to clean, smooth surfaces.
• Push the mounting fixture lightly against the clean aquarium wall until it sticks.
– The pump can be pulled off the mounting fixture.
– Pull on the straps of the suction cups to remove the mounting fixture.
FASTENING THE PUMP WITH THE MAGNETIC HOLDER
The StreamMax Magnetic Holder (87011) is available as an accessory and is installed in place of the suction cups
on the mounting bracket.
!
WARNING
The magnet holding fixture contains a magnet with a strong magnetic field that may affect pacemakers or implanted
cardioverter defibrillators (ICDs).
• Always keep magnets at least 8 in. away from implanted devices
E, F
• Insert the rubber buffer of the magnet holding fixture in the pump foot with a turning movement, then fit
the magnet holder.
• Position the magnet holder on the clean aquarium wall and carefully position the magnet from the outside.
– Max. thickness of the aquarium wall for secure fastening: 0.6 in.
– The pump can be pulled off the mounting bracket.
– Releasing the magnet holding fixture: Push the magnet away from the magnet holder.
ALIGNING AND ADJUSTING THE PUMP
G, H
• Align the pump, taking the recommended spacing into account.
• Route the connection cable so that it forms a drip loop.
I
• Adjust the flow rate.
– To reduce the flow: Move the flow controller in the direction -.
– To increase the flow: Move the flow controller in the direction +.
4
StreamMax Classic 2000/4000/5000