Sony NSBK-DH05 Manual De Instalación página 9

9
Orient the analog RGB cable properly,
and connect it to the connector (J5) on
the display accelerator board.
Be sure to verify that the cable is
connected securely.
10
Attach the supplied connector cover to
monitor connector 1.
11
Reinstall the chassis cover by
performing the procedure of step 1 in
reverse order.
Step 2:
Connecting the
Monitor
Connect the monitor to monitor connector 2
or the HDMI monitor connector.
HDMI monitor connector
or
Monitor connector 2
Caution
• When monitors are connected via a
monitor switch, images may not always
display. We recommend connecting
monitors directly to the unit.
• Monitor connector 2 and the HDMI
monitor connector cannot be used at the
same time.
Step 2: Connecting the Monitor 9