Bond 52119 Manual Del Usuario página 5

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATION
To Light
1. Make sure all debris is removed from the re pit.
2. Place a layer of dry kindling or a natural restarter onto the center of the log rack.
3. Place above that a layer of dry seasoned hardwood that is cut to lengths no more than 3/4 the
width of the rebowl.
4. Use a long match to light kindling.
To Extinguish
Tending The Fire
3. Wait until glowing coals have developed before adding any additional wood. If additional wood is
required, place wood on top of coals. Be careful not to shift ashes.
MAINTENANCE
• This outdoor re pit should be inspected on a regultor basis to ensure product safety and long
product life.
• Check handles to make sure they are secure.
• Check components for any signs of damage.
• Wipe exterior surfaces with a mild cleaning product and water.
• For stubborn surfaces use a citrus based degreaser and soft cloth.
• Rinse surfaces clean of any cleaning product with water after cleaning is complete.
• Remove built-up creosote from components with a chimney cleaning product.
Store re pit in a cool dry place.
• Use manufacturer-approved or supplied replacement parts and accessories only. Otherwise it
may void the warranty of this product and result in a hazardous condition.
• Keep the re pit free and clear from combustible materials and debris.
1-866-771-2663 | Page 5

Publicidad

Tabla de contenido
loading

Tabla de contenido