LAN
Under IP CONFIGURATION, you can select the TYPE of LAN connection (DHCP
or STATIC). Select STATIC if you want to manually set the IP, SUBNET MASK,
GATEWAY and DNS1/2 options.
Then select CONNECT and confirm with O K . The network connection will then
be established. The message CONNECT OK appears. Then press the E X I T but-
ton to move to the next setup point of the initial installation.
Wifi
All available networks are then displayed under the BASE STATION option. Se-
lect a network using the direction buttons and press O K .
Enter the required password using the virtual keyboard, then select the return
key and confirm with O K .
Then confirm the CONNECT option with O K . The network connection is now
established. The message CONNECT OK appears. Then press the E X I T button
to move to the next setup point of the initial installation.
If you do not want to establish a network connection during the initial
installation, you can do this at any time in the menu under NETWORK.
If you wish, you can now set up your Netflix account. If you do not have a Netf-
lix account or want to set it up later, select SKIP to go to the next setup point of
the initial installation. Select CONFIGURE NETFLIX and confirm with O K if you
want to set up the account.
Once the installation is complete, you can return to the initial installation by
pressing the E X I T button. Then select SKIP to go to the next setup point of the
initial installation.
Select the desired antenna connection ANTENNA, CABLE or SATELLITE.
After confirming the selection with O K , confirm the NEXT option by pressing
the O K button.
Welcome! Please use a few seconds to setup your Smart TV!
Please select your antenna mode.
Satellite
Antenna
Cable
Next >
< Back
Quit
EN
25