Troubleshooting - Medion LIFE P15052 Manual De Instrucciones

13. Troubleshooting

Fault
There is no picture
and no sound.
There is no AV pic-
ture.
There is no sound.
There is no picture
and no sound. I can
hear noise, though.
The picture is not
clear.
The picture is too
bright or too dark.
The picture is not
sharp.
There is a double/tri-
ple picture.
The picture is pix-
elated.
Corrective action
• Check if the power cable is inserted in the socket prop-
erly.
• Check if the signal reception is set to TV.
• Check to ensure that the contrast and brightness set-
tings are correct.
• Check to ensure that all external devices have been
connected properly.
• Check to ensure that you have selected the correct AV
source.
• Ensure that the volume has not been set to the mini-
mum level.
• Ensure the mute setting is not active. Do this by press-
ing the button with the crossed out loudspeaker sym-
bol on the top left of the remote control.
• Check whether headphones are connected.
• If you have connected a satellite receiver or DVD player
to the television via a SCART cable, check whether the
cable has been connected to the SCART socket prop-
erly.
• The reception might be poor. Check if the antenna is
connected properly.
• The reception might be poor.
• Check if the antenna is connected properly.
• Check the contrast and brightness settings.
• The reception might be poor.
• Check if the antenna is connected properly.
• Check the sharpness and noise reduction settings in
the PICTURE menu.
• Check if the antenna is aligned properly.
• Waves might be reflected off buildings or hills.
• There might be interference from cars, trains, power
lines, neon lights, etc.
• There might be interference between the antenna and
power cables. Position the cables further apart.
EN
71