Medion LIFE P15052 Manual De Instrucciones página 147

9.8.2. Timeshift function during PVR recording
You can also view the programme with a time delay during PVR recording. To do so,
proceed as follows:
 In TV mode, press the  button. The currently selected programme then starts
being recorded.
You can select these options during the recording:
 – : Stops the recording
– : Time-delayed playback of the current recording. The recording runs in the
background again (timeshift function)
 Then press the  button. The current recording is now played back starting
from the time the recording began. The recording continues to run in the back-
ground, allowing the programme to be played back with a time delay.
The following options can only be selected when playing a recording:
– : Activate A-B playback
– : Pause playback
 – /: Fast forward/rewind
 – : Stop playback
– : Set the time that playback is to start 
 A-B playback: Mark the start point A for a loop playback by pressing the 
button again. Pressing the  button several times defines the end point B. The
section between the two points is now repeated in a continuous loop. To exit
A-B playback mode, press . You return to timeshift playback.
 To exit timeshift mode, press  again. The current programme is then shown in
real time again. The started PVR recording continues running.
 To stop this, press  again. Confirm the subsequent prompt by pressing OK.
If you are using the timeshift function during recording, a normal PVR re-
cording also always runs in the background, and this is then displayed in
the PVR recording list.
62