Pin Assignment; Maintenance And Cleaning; Declaration Of Conformity - D+H CDC 200/350 Manual Original

Pin Assignment

Standard
YE (-TMS)
BN (Mot. b)
WH (Mot. a)

Maintenance and cleaning

Inspection and maintenance has to be carried out
according to D+H maintenance notes. Only original
D+H spare parts may be used. Repair is to be carried
out exclusively by D+H.
Wipe away debris or contamination with a dry, soft
cloth.
Do not use cleaning agents or solvents.

Declaration of Conformity

We declare under our sole responsibility that the
product described under "Technical Data" is in
conformity with the following directives:
2004/108/EC, 2006/95/EC
Technical file at:
D+H Mechatronic AG, D-22949 Ammersbek
Thomas Kern
Member of the Board
12.06.2010
99.823.30 2.3/09/13
Option -BRV
YE (-TMS)
GY (-BRV)
BN (Mot. b)
WH (Mot. a)
Maik Schmees
Authorized signatory, Technical Director
Option -SGI
YE (-TMS)
GY (-SGI)
GN (-SGI)
BN (Mot. b)
WH (Mot. a)
Mot. a Mot. b
(WH) (BN)
Guarantee
You will get 2 years guarantee for all D+H products
from date of verified handing over of the system up to
maximal 3 years after date of delivery, when
mounting and starting has been carried out by an
authorized D+H-distributor.
D+H guarantee is expired, with connection of D+H
components with external systems or with mixing of
D+H products with parts of other manufacturers.
Disposal
Electrical devices, accessories and packaging
should be sorted for environmental-friendly recycling.
Do not dispose electrical devices
into household waste!
Only for EC countries:
According the European Guideline
2002/96/EC for waste electrical and
electronic equipment and its implemen-
tation into national right, electrcal devices that are no
longer usable must be collected separately and
disposed of in an environmentally correct manner.
English
(YE) yellow
(GY) grey
(GN) green
(BN) brown
(WH) white
7/16
CDC 200/350