ARIETE Gran Gelato 693 Instrucciones De Empleo página 4

E N
16. If the ice cream or sorbet contain raw eggs, do not feed to children, pregnant
women or the elderly.
17. Never place ingredients in the freezer for pre-chilling as in this way, the mixing
paddle could become blocked before the ice cream has actually formed.
18. Only use the ice cream maker with the lid fitted.
19. Never operate the appliance when it is empty.
20. NEVER TOUCH MOVING PARTS.
21. Keep fingers, utensils, etc. at a safe distance from the removable container while
the appliance is operating; this is to reduce the risk of damage to people or to the
machine itself. NEVER USE SHARP OR METAL UTENSILS OR OTHER ITEMS
INSIDE THE CONTAINER. These items can damage the ice cream maker. It is
fine to use rubber or wooden utensils when the ice cream maker is switched off.
22. Never remove the power base while the ice cream is being made.
23. To extend the freezing function after finishing the ice cream making cycle, it is
necessary to remove the power base immediately or risk shortening the useful
life of the motor.
24. To unplug the appliance, grip the plug and remove it directly from the power
socket. Never pull the power cord to unplug the appliance.
25. Never use the appliance if the power cord or plug are damaged or if the appli-
ance itself is faulty; in this case, take it to your nearest Authorised Assistance
Centre.
26. To prevent any risks, if the power cord is damaged, it must be replaced by the
manufacturer, its Technical Assistance Service or a similarly qualified person.
27. This appliance is designed for HOME USE ONLY and may not be used for com-
mercial or industrial purposes.
28. This appliance conforms to the directives 2006/95/EC and EMC 2004/108/EC,
and to the regulations (EC) No. 1935/2004 of 27/10/2004 regarding material in
contact with foods
29. Any changes to this product that have not been expressly authorised by the
manufacturer may lead to the user's guarantee being rendered null and void.
30. In the event that you decide to dispose of the appliance, we advise you to make
it inoperative by cutting off the power cord. We also recommend that any parts
that could be dangerous be rendered harmless, especially for children, who may
play with the appliance or its parts.
31. Packaging must never be left within the reach of children since it is potentially
dangerous.
- 2 -
32. To dispose of product correctly according to European Directive 2009/96/
CE, please refer to and read the provided leaflet enclosed with the product.
DO NOT THROW AWAY THESE INSTRUCTIONS
DESCRIPTION OF THE APPLIANCE (FIG. 1)
A
Appliance body
B Control panel
C Fixed container
D Removable container
E Mixing paddle
F Lid
G Cap for ingredient insertion opening
H Power unit
BEFORE YOU MAKE ICE CREAM
WARNING: ALWAYS UNPLUG THE POWER CORD FROM THE ELECTRICITY MAINS BEFORE
FITTING OR REMOVING SINGLE ATTACHMENTS OR BEFORE CLEANING THE APPLIANCE.
- Wash all parts that will be coming into contact with the ice cream thoroughly before: fixed container
(C), removable container (D), mixing paddle (E), lid (F), graded goblet (Q) and scoop (R).
- Prepare the ingredients for your recipe or one of the recipes in this booklet, mixing together well
in a large container.
IMPORTANT: To guarantee the correct operation of the appliance, it is necessary to insert two dessert
spoons (approx. 25-30 ml) of food-grade alcohol or other high-strength alcoholic drink between the fixed
and removable baskets.
IMPORTANT: It is not necessary to chill the container in a freezer because this ice cream maker has
an internal compressor that will chill the ingredients to make the ice cream.
APPLIANCE ASSEMBLY
WARNING: ALWAYS UNPLUG THE POWER CORD FROM THE ELECTRICITY MAINS BEFORE
FITTING OR REMOVING SINGLE ATTACHMENTS OR BEFORE CLEANING THE APPLIANCE.
IMPORTANT: Always use the ice cream maker upright and on a flat surface to get the best from the
compressor.
- Insert the removable container (D) into the fixed one (C) inside the machine (Fig. 2).
- Place the mixing paddle (E) inside the removable container (D) (Fig. 3).
- Fit the lid (F) onto the appliance body, holding the mixing paddle (E) in the upright position in the
centre of the lid and locking it in place by turning it clockwise so that the tabs on the power base
slot into the openings on the lid (Fig. 4).
- Close the opening for inserting ingredients with the special cap (G) (Fig. 5).
- Fit the power unit (H) onto the lid (F) and make sure that the motor axle has been inserted properly
into the hole on the top part of the mixing paddle (Fig. 6).
I
Cooling LED
L Display
M Mixing LED
N Timer button
O Start / Stop button
P Power button
Q Graded goblet
R Ice cream scoop
- 3 -
E N