Connecting Your Telephone; Choosing A Location; Installation - Clarity 435 Guía De Usuario

Connecting Your Telephone

Carefully remove your cordless telephone
from it's box. If there is any visible damage,
do not attempt to operate this equipment.
Return it to the place of purchase.
Check to be sure that you have all items that
come with your telephone. You should have
a HANDSET, BASE UNIT, AC ADAPTER, TELE-
PHONE LINE CORD, BELT CLIP and OWNERS
MANUAL. A BATTERY is also included and is
located in the battery compartment.
If at any time you have questions about your
telephone please contact our Customer
Service Department at: 1-800-552-3368 or
423-622-7793.

Choosing a Location

1. This phone requires a modular phone
jack (RJ11) and a standard 120V AC
wall outlet.
2. Plug the AC Adapter directly
into outlet.
3. Do not plug other appliances into
outlet or have outlet controlled by a
wall switch.
4. Choose a location that is away from
normal activities.
CAUTION: USE ONLY WITH CLASS 2
POWER SOURCE 9V DC, 500mA.
8
Getting Started
Always connect the AC Adapter to the
phone before you connect it to the AC power.
When disconnecting the phone, disconnect
the AC power before you disconnect it from
the phone.

Installation

Follow these instructions to place the base on
a desk or tabletop.
1. Plug one end of the supplied modular
2. Plug the modular telephone line cord's
3. Insert the supplied AC Adapter's
USE ONLY WITH CLASS
!
(CLASSE) 2 POWER SOURCE
PULSE/TONE
telephone line cord into the jack
marked TEL located on the back of
the telephone base.
other end into a modular phone jack.
plug into the jack marked 9V DC
500mA located on the back of the
telephone base.
BOOST
9VDC
ON/OFF
TEL
500mA