Robern MT Instrucciones De Instalación página 3

Figure C
This fi gure gives an overall picture
for all types of installations.
CABINET
FRONT
DOOR
PRE-DRILLED HOLES FOR
CABINET-TO-CABINET
OR CABINET-TO-SIDE KIT
CONNECTIONS.
Use #10 x 1/2" (12.7mm) thread-cut
connector-block screws and cap.
TOP OF CABINET
HINGE
INSIDE OF CABINET
OPTIONAL
ELECTRIC
SHELF
HINGE
BOTTOM OF CABINET
MOUNTING BAR
FOR SURFACE
MOUNT
WALL LOCATION
(RECESSED MOUNT)
PUNCH/DRILL LOCATION FOR
RIGID ELECTRICAL CONDUIT
INSTALLATIONS
FEED-THROUGH HOLE FOR
FLEXIBLE ELECTRICAL CABLE
INSTALLATIONS
CENTERLINE
FOR ELECTRICAL
1 3/4"
CONNECTIONS
(44.5 mm)
ACCESS SCREWS
FOR OUTLET SHELF
MOUNT/UNMOUNT
HINGE HERE
PRE-DRILLED HOLE FOR
RECESSED CABINET.
INSTALLATION ONLY.
Use #10 pan head SMS/wood screw
(2" or 3") [50.8mm or 76.2mm] and cap.
WALL LOCATION
(SURFACE MOUNT)
3
TOP "Z" CLIP FOR
SURFACE MOUNT
(3 PER CABINET)
PRE-DRILLED HOLE FOR
RECESSED CABINET.
INSTALLATION ONLY.
Use #10 pan head SMS/wood screw
(2" or 3") [50.8mm or 76.2mm] and cap.
PRE-DRILLED HOLES FOR
CABINET-TO-CABINET
OR CABINET-TO-SIDE KIT
CONNECTIONS.
Use #10 x 1/2" (12.7mm) thread-cut
connector-block screws and cap.
6 11/16"
(176.2 mm)
209-1090 MP and MT Cabinets 03/29/07