Kohler Aquifer Reverse Osmosis Guia De Instalacion página 11

Unfiltered Water
Faucet Supply
Tee
8. Connect the Hoses
IMPORTANT! Water from the supply line must be connected to the filter head inlet. Water from the tank
head outlet must be connected to the tank. Water from the faucet head outlet must be connected to the
faucet. System performance and filter capacity will be compromised if connected incorrectly.
NOTE: Connect the hoses as directed. Do not reverse the connections.
Press one end of the inlet tube firmly into the inlet port on the filter head.
Connect the other end of the tube to the cold water supply.
Insert the end of the 3/8" blue tube into the outlet of the manifold labeled "TANK" approximately
5/8" until it stops.
Locate the black tube already attached to the faucet stem.
Measure the length needed to connect to the filter head outlet labeled "FAUCET" on the water
filtration system.
If necessary, cut the black tube to the desired length. Verify there is enough tubing to freely
assemble and attach.
Insert the end of the black tube into the filter head outlet labeled "FAUCET." Verify connection is
secure.
If used, connect the unfiltered water faucet inlet to the tee.
Kohler Co.
Inlet
3/8" Cold
Water Supply
Tank
3/8" Blue
Tube
11
Black Tube
Faucet
1395432-2-B