Philips WelcomeEye Link Manual Del Usuario página 31

Step 2. :
Insert the battery (making sure you insert it the right way up, with the micro USB
plug side first) until the support lug clicks.
Step 3. :
Check that the micro SD card is there, if you did not do so while carrying out tests
on a table.
32
Gb
Step 4. :
Attach the front, positioning the top (A) first, then the bottom (B). Use the anti-
theft screw provided (C) to complete installation.
A B C
GB12
WelcomeEye / Link / V1