Network Setup - WISEUPSHOP WIFI 26 Guia Del Usuario

3.3. It will take up to 6 hours to obtain a full charge. The clock is able to record videos
continuously for 4 hours on a full charge.
[Notes]:
1). The clock can be charged when it is powered on or off.
2). If you want the clock to work all the time, then keep it connected with the outlet power socket by
using the charging adapter and USB cable provided.
3). When the battery is taken out, the clock can still work with the outlet power supply.
IV. Network Setup
4.1. Install the "P2PCAMM" APP
Download the "P2PCAMM" APP from App Store or Google Play and install it on your
smartphone or tablet PC.
4.2. P2P or LAN Mode Setup
>> Before using, open the cell cover, and remove the insulating film from the battery
holder. The time will show on the LCD display.
4.2.1. Slide power switch to the "ON" position and the power indicator light will illumi-
nate yellow. After 15 seconds, the network indicator light will flash yellow quickly for
20 seconds and then flash slowly, indicating the WIFI signal is ready.
4.2.2. Go to WIFI setting page on your smartphone or tablet PC and connect to the
clock's WIFI signal. The clock's WIFI network SSID starts with "RT-************" and
will appear on your WIFI setting page as follows: