Use And Care/Assembly; Helpful Reminders - Cuisinart SmartPower SPB-7 Serie Instrucciones Y Libro De Rectas

6. Locking Ring
Is self-aligning so that the glass blender jar slides easily into
position.
7. Heavy-duty Motor Base
Is so sturdy and stable, it will not "walk" on your counter –
even during ice crushing!
8. 7-Speed Touchpad Control with Indicator Lights
Is easy to use, read and clean. The red LED lights clearly
indicate what blender speed you are using.
8a. Pulse at Any Speed Button
Allows you to pulse at any speed from high to low, so you can
blend ingredients only as much as needed.
8b. Ice Crush Button
This button is preset to the best speed for crushed ice.
9. Slip-proof Feet
Prevent movement during use and prevent damaging marks
on countertops or tables.
10. Cord Storage (not shown)
Keeps countertop safe and neat by conveniently storing
excess cord.
USE AND CARE
(d)
(c)
(b)
(a)
4
ASSEMBLY
To use your Cuisinart
®
SmartPower Electronic Blender,
™
begin by assembling the blender
jar.
1. Turn the blender jar (a) upside
down, and place it flat on
a sturdy surface.
. Position the rubber gasket (b) on
the round opening on the bottom
of the blender jar.
3. Turn the cutting assembly (c)
upside down, and place the
blade end in the blender jar
opening.
Note: Blades are sharp...
handle carefully.
4. Secure the rubber gasket and cutting assembly into position
by placing the smaller opening of the locking ring (d) on top of
the cutting assembly. Engage threads by twisting the locking
ring clockwise until tightened. Make sure locking ring is tightly
fastened to blender jar. Once assembled, turn the blender jar
right-side up.
5. Push the cover onto the top of the blender jar. Push the mea-
sured pour lid into the cover.
6. Place the blender jar on the motor base so that the jar markings
are facing you and the handle is positioned to one side.
7. Plug in power cord. Your blender is now ready to be used.

HELPFUL REMINDERS

• Once the cover is in position, additional ingredients can be
added during blending by simply lifting the measured pour
lid, adding ingredients, and replacing the measured pour lid.
• Cover should always be in place while the unit is on.
• Warning: Do not place blender jar onto base while motor
is running.
• Do not twist locking ring from blender jar when removing blender
jar from base. Simply lift blender jar from motor base.
• Boiling liquid or solid frozen foods (with the exception of ice
cubes or ½-inch [1.3 cm] pieces of frozen fruit) should never be
placed in the blender jar.
• Do not place ice, frozen foods or very cold liquids in a blender jar
which has come directly from a hot dishwasher.
• Do not place very hot liquids or foods in a blender jar which has
come directly from the freezer. Boiling liquids should cool for 5
minutes before being placed in blender jar.
• Follow Cleaning and Maintenance instructions on page 6, prior to
your first use.