Dash Disassembly - Metra 95-7319 Instrucciones De Instalación

1. Unclip and remove panel surrounding
shifter including cup holders. (Figure A)
2. Remove (2) Phillips screws at base
of panel surrounding radio and a/c
controls. (Figure B)
3. Unclip and remove panel surrounding
radio and a/c control. (Figure C)
4. Remove (6) Phillips screws securing
radio and a/c control. (Figure D)
5. Remove (4) Phillips screws securing
factory a/c control to bracket assembly.
(Figure E)
Continue to Kit Assembly
2

DASH DISASSEMBLY

(Figure A)
(Figure B)
(Figure C)
VOL
LOAD
(Figure D)
2 Phillips screws on each side
(Figure E)
|
1.800.221.0932 MetraOnline.com