Disabling the wireless function
Wireless functions (Wi-Fi, Bluetooth) of the unit can be disabled.
Disabling the Wi-Fi
function
When the unit is in the standby state, press
of the remote control while holding
down SOURCE of the unit.
• "OFF" will be shown on the front panel display
when you disable the Wi-Fi function.
• To enable the Wi-Fi function, follow the
procedures in "Connecting to the network"
(
P.15) and reconnect the unit to the network.
• When the source is switched to the network
contents under the Wi-Fi function disabled, "OFF"
will be shown on the front panel display.
Disabling the
function
When the unit is in the standby state, press
of the remote control while holding
down SOURCE of the unit.
• Each time the operation is repeated, this function
switches to enable/disable, and "ON"/"OFF" will
be shown on the front panel display.
• When the source is switched to Bluetooth under
the Bluetooth function disabled, "OFF" will be
shown on the front panel display.
NET
• Set the side panel CLOCK switch to "ON." It is not
possible to change the setting in "OFF."
• The wireless function is enabled, when you
connect to the network or the network setting is
initialized.
37
En