Sleep Mode; Auto Mode; Vesync App Functions; Important Tips - Levoit Classic 300S Manual Del Usuario

EN

Sleep Mode

Sleep Mode changes the humidifier's mist
setting to Auto Mode, turns off the display
lights, and turns off the night light.
• When Sleep Mode is on, you can press
to turn the night light on/off. The
humidifier will stay in Sleep Mode.

Auto Mode

Auto Mode uses the humidifier's sensor to
automatically adjust the mist level (or turn it
off) to maintain a comfortable and healthy
level of humidity.
• Auto Mode automatically adjusts the
mist level to maintain 40–50% relative
humidity. You can change the target
humidity level in the VeSync app.
• By default, Auto Mode uses Automatic
Stop. The humidifier will stop misting
when the highest target humidity level is
reached. If the humidity drops below the
target humidity level, the humidifier will
begin misting again.
• If Auto Mode is selected when the
humidity is higher than the target
humidity range, the humidifier will not
start misting until the humidity lowers.
• In the VeSync app, you can turn
Automatic Stop on/off. If Automatic Stop
is off, the humidifier will keep running on
Low mist level when the highest target
humidity level is reached.
16

VeSync App Functions

The VeSync app allows you to access
additional smart functions, including those
listed below.
Remote Control
• Turn the humidifier on/off from your phone.
• Cycle through mist levels and turn on/off
Auto Mode and Sleep Mode from your
phone.
• Turn the display lights and night light
on/off from your phone.
• Customise Auto Mode settings like target
humidity and auto-off.
Monitor Humidity Levels
• Check current humidity levels in the
humidifier's environment.
Set Timers & Schedules
• Program individual timers or create a
schedule for your smart humidifier.
Third-Party Voice Control
• Compatible with Amazon Alexa and
Google Assistant for voice commands.
Note: The VeSync app is continually updated and
app features will expand.

Important Tips

Your humidifier must have the correct level of
water in the base chamber to work properly. If
there is too much water in the base chamber,
the humidifier cannot create mist.
• Never pour water directly into the
base chamber. [Figure 3.4] Only add
water to the water tank. The humidifier
will automatically release the correct
amount of water into the base chamber.
• Avoid moving or shaking the humidifier.
[Figure 3.5] This may cause the water
tank to release too much water into the
base chamber.
Before moving the humidifier, turn it off,
•
unplug it, and remove the water tank.
• If your humidifier doesn't produce mist
correctly, check the max water line to
see if there is too much water in the
base chamber. Pour out extra water if
water is over the max line. [Figure 3.6]
Note: The max water line is only for this purpose.
Do not pour water into the base chamber.
EN
Figure 3.4
Figure 3.5
Figure 3.6
17