Husky H4510 Guía De Uso Y Cuidado página 7

Operation
(continued)
3
Loading the grease gun - Option 2
Filler Pump
□ Pull the plunger handle completely back and lock into
place .
□ Insert the bulk fill valve into the filler pump socket .
□ Fill the container tube and disconnect the grease gun from
the filler .
□ Press the plunger release to release the plunger handle rod
and push the plunger handle back into the container tube .
5
Installing the flexible or rigid nozzle
WARNING: Disconnect the the grease gun from the air
supply before servicing or changing accessories .
□ Fit the flexible nozzle (included) or the rigid nozzle (not
included) to the oil screw in the front of the nose piece . Use
the suitable size open end wrench to tighten the flexible or
rigid nozzle .
To remove the flexible nozzle or rigid nozzle:
□ Disconnect the tool from the air source .
□ Remove the flexible nozzle or the rigid nozzle with the open
end wrench .
4
Loading the grease gun - Option 3
Bulk Filling
□ Unscrew the gun head from the container tube .
□ Pull the plunger handle back approximately 2 to 3 inches
and fill this section of the container tube .
□ Repeat this process until the entire container tube is filled .
Be careful to pack without air pockets .
□ Screw the gun head and container tube back together .
□ Press the plunger release to release the plunger handle rod
and push the plunger handle back into the container tube .
6
Inserting grease
□ Affix the nozzle to the desired fitting and pull the trigger
until the fitting is full .
7
Please contact 1-888-43-HUSKY for further assistance .
HUSKYTOOLS .COM