OPEN THE PACk
fold back the unzipped top
and gently rest the flap on
the windshield.
lOAd yOuR GEAR
distribute the contents evenly.
do not over-Stuff the PAck!
ClOSE THE bAG
• replace the top cover flap
• close the zipper completely.
If there is any resistance, check
for overstuffing.
CONNECT
COMPRESSION STRAP
buCklES
• tIghten All four
comPreSSIon StrAPS.
• Pull strap ends against bag
contents.
1033385A - 3/12
• Align zipper tabs at the center-back.
• Attach a lock or zip tie through
zipper lock rings if desired.
SECuRE EXCESS
STRAP
Use hook and loop tabs.
The top must unfold
towards the front of
the vehicle!
ROOf STRENGTH
Do not exceed the capacity of
your vehicle's roof.
Refer to your vehicle owner's
manual for limitations.
Use caution when cutting a
zip tie; do not allow cutting
tool to contact bag!
CHECk THE lOAd!
Pull and push the loaded pack.
• If there is strap movement, tighten
where needed.
• check the straps as you travel and
tighten if necessary!