Playback
Angle Mark
You can set to display the Angle Mark (
Blu-ray Disc/DVD with multiple angles is played back.
*
On
, Off
PIP Mark
You can set to display the PIP Mark (
Disc with picture in picture (p. 20) is played back.
On
*
, Off
Secondary Audio Mark
You can set to display the Secondary Audio Mark (
when Blu-ray Disc with secondary audio is played back.
On
*
, Off
Last Memory
You can set whether this Player remembers the last
playback position of a disc when it is set to standby mode
or the disc tray is opened.
*
On
, Off
Note
– Some discs are not compatible with this function.
Security
Change Password
You can set the password for changing the Parental
Control Level and Country Code. Refer to "Parental
Control" (p. 25) and "Country Code" (p. 25).
Notes
– The default password is 0000.
– If you forget the password, refer to
"Troubleshooting" (p. 31) and set all the Security
settings to their default settings.
Parental Control
In some Blu-ray Discs/DVDs, a control level for disc
viewing is set depending on the age of the viewer. You
can set the Parental Control shown on the screen
depending on the disc content.
The password (see "Change Password" on p. 25) needs to
be entered before the Parental Control Levels is set.
After you set the Parental Control, when you play back a
disc with level higher than current Parental Control Level,
or you want to change the Parental Control Level, a dialog
box will pop up to ask you to enter the password.
Off*, 1–8
Country Code
You can set the Country Code you live in. The password
(see "Change Password" on p. 25) needs to be entered
before the Country Code is set. This setting may be used
for rating of Parental Control and disc playback.
Network
Internet Connection
) when
Set this item to Enable when you use BD-Live (p. 20), DLNA
(p. 15), software upgrade from the network (p. 30), and the
other network functions.
*
Enable
Information
) when Blu-ray
You can display network information screen. On this
screen, you can view the information of Interface
(Ethernet), Address Type, IP Address, Subnet Mask,
Default Gateway, and DNS.
)
Connection Test
You can perform an internet connection test. If the test is
failed, please check "IP Setting" (p. 25) and perform the
test again.
IP Setting
You can configure the network settings.
Auto*
Manual
Hints
– Numeric keys Enters characters.
– 2/3
– CLEAR
– ENTER
BD-Live Connection
You can set access restriction to BD-Live contents.
Permitted
Partial
Permitted
Prohibited
DLNA
You can set the DLNA (p. 34) to Enable/Disable. When
you do not use the DLNA function, set to Disable.
*
Enable
Proxy Setting
You can set Proxy Setting. Set to Disable for normal use.
Set to Enable to set the proxy setting.
Enable
Disable
Proxy Host
Proxy Port
, Disable
Select to automatically configure the network
settings of this Player with the DHCP server.
Select to configure the network settings (IP Address,
Subnet Mask, Default Gateway, and DNS) manually.
Moves the highlight.
Deletes a character.
Saves the settings and exits from
the menu.
Allows all BD-Live discs to connect the network.
Allows only discs with owner certification.
*
Prohibits all BD-Live discs to connect the network.
, Disable
Enables proxy host and proxy port setting.
*
Sets proxy server to disable. Select this item when
proxy server is not used.
Sets proxy host.
Sets proxy port.
SETUP menu
4
25
En