Cisco Linksys WUSB300N Instalación Rápida página 61

B
Select the wireless mode you
want to use. Then, enter the
wireless network name (SSID) for
your network.
Infrastructure Mode - Use this
mode if the Adapter will
connect to a wireless router or
access point.
Ad-Hoc Mode - Use this mode
if the Adapter will directly
connect to another wireless
device.
Wireless Network Name - Enter
the wireless network name
(SSID) used by all devices in
your wireless network.
Click Next.
C
If you chose Infrastructure
Mode, go to Step D. If you
chose Ad-Hoc Mode, the Ad-
Hoc Mode Settings screen will
appear. Select your channel
and network mode settings.
Network Mode - Select the
Network Mode in which your
wireless network will operate. In
Mixed mode, Wireless-N,
Wireless-B and Wireless-G
devices can operate on the
same network. In Wireless-G
Only mode, no Wireless-B
devices can operate in the
network.
B
C
7