Set Up The Adapter - Cisco Linksys WUSB300N Instalación Rápida

2

Set Up the Adapter

The Available Wireless Networks
screen offers two options for setting
up the Adapter.
NOTE:Later you can use this screen
again to set up configuration
profiles with connection
settings for different
networks.
• Available Wireless Networks.
Most users should use this
option. The networks available
to this Adapter will be listed on
this screen. You can choose
one of these networks and
click Connect to connect to it.
Click Refresh to update the
Available Wireless Network list.
• Advanced Setup. To set up the
Adapter manually, select
Advanced Setup.
Follow the instructions for the option
you are using.
Setting Up the Adapter with an
Available Network
The available networks are listed in
the table by Wireless Network Name
(SSID). Select the wireless network you
wish to connect to and click
Connect. If the network uses wireless
security, you will need to configure
security on the Adapter. If not, you
will be taken directly to the
Congratulations screen.
Available Wireless Networks
3